Class 10 Maths Notes Chapter 7 — Coordinate Geometry#
Distance formula#
The distance between $P(x_1, y_1)$ and $Q(x_2, y_2)$ is
$$PQ = \sqrt{(x_2 - x_1)^2 + (y_2 - y_1)^2}$$The distance of $P(x, y)$ from the origin is
$$OP = \sqrt{x^2 + y^2}$$
The distance $PQ$ is the hypotenuse of a right triangle with legs $x_2 - x_1$ and $y_2 - y_1$, so Pythagoras gives the formula.
- A point on the x-axis is $(x, 0)$. A point on the y-axis is $(0, y)$.
- “Equidistant from A and B” means $PA = PB$. Square both sides, $PA^2 = PB^2$, to remove the square roots.
Uses of the distance formula
- Collinear points: A, B, C lie on one line if the sum of the two shorter distances equals the longest, for example $AB + BC = AC$.
- Triangles: two sides equal → isosceles; all three equal → equilateral; $AB^2 + BC^2 = AC^2$ → right-angled.
- Quadrilaterals (find all four sides and both diagonals):
| Sides | Diagonals | Quadrilateral |
|---|---|---|
| All four equal | Equal | Square |
| All four equal | Not equal | Rhombus |
| Opposite sides equal | Equal | Rectangle |
| Opposite sides equal | Not equal | Parallelogram |
Section formula#
The point $P(x, y)$ dividing the join of $A(x_1, y_1)$ and $B(x_2, y_2)$ internally in the ratio $m_1 : m_2$ is
$$P = \left(\frac{m_1x_2 + m_2x_1}{m_1 + m_2},\ \frac{m_1y_2 + m_2y_1}{m_1 + m_2}\right)$$
- $m_1$ goes with the second point $B$, and $m_2$ with the first point $A$.
- Unknown ratio: take the ratio as $k : 1$. Then $$P = \left(\frac{kx_2 + x_1}{k + 1},\ \frac{ky_2 + y_1}{k + 1}\right)$$ Equate one coordinate to the given value and solve for $k$.
- Divided by the x-axis: put the $y$-coordinate equal to 0. By the y-axis: put the $x$-coordinate equal to 0.
Mid-point and trisection#
Mid-point of the join of $(x_1, y_1)$ and $(x_2, y_2)$ (ratio $1 : 1$):
$$\left(\frac{x_1 + x_2}{2},\ \frac{y_1 + y_2}{2}\right)$$
- Points of trisection divide a segment into three equal parts. Use the ratios $1 : 2$ and $2 : 1$.
- Four equal parts: ratios $1 : 3$, $1 : 1$ and $3 : 1$.
- Parallelogram: its diagonals bisect each other, so the mid-points of both diagonals are the same point. Use this to find a missing vertex.
- Circle: the centre is the mid-point of any diameter.
Common mistakes#
- Swapping $m_1$ and $m_2$ in the section formula. $m_1$ multiplies the coordinates of the second point.
- Forgetting brackets with negatives: $(x_2 - x_1)^2$ with $x_1 = -5$ is $(x_2 + 5)^2$.
- Deciding a quadrilateral from the sides alone. A rhombus and a square both have four equal sides, so check the diagonals.
- Using “a point on the x-axis” as $(0, y)$. On the x-axis, $y = 0$.